How do I pair my Accu-Chek Guide meter with Glooko®?

Let's get started!

You can upload data from your Accu-Chek Guide meter to the Glooko Mobile app for iOS and Android by following the instructions below.

What you will need:

  • Glooko app installed on a compatible Android or iOS smart device
  • Your Accu-Chek Guide meter

Time to Sync!

In the Glooko Mobile app, navigate to the Sync Menu:

  1. From the Home screen, tap Sync.
  2. Tap Accu-Chek Guide (if it is not already listed as an option, add it by tapping Add Device).
  3. In the Glooko Mobile app, tap Pair > Pair Meter > Next.
  4. On the Accu-Chek Guide meter, press OK > Settings > OK.
    • Continue on the meter by scrolling down to Wireless and press OK.
    • In the Wireless menu, scroll down to Pairing and press OK. NOTE: the Pair Device screen should read "No paired device. Pair now?"
    • Select Yes and press OK on the meter to display the Pairing Code.
  5. Return to the Glooko app, type in the Pairing Code, and tap OK.


Helpful Hints:


  • Verify the meter is not paired from the Bluetooth Device list on your smart device. If it is already paired with your smart device's Bluetooth list, remove the device from your Bluetooth settings and try again.
  • Make sure meter is within 20 feet of iOS or Android device.



  • Make sure that the correct default device is selected on the meter in the pairing settings.
  • Make sure meter is within 20 feet of iOS or Android device.
Was this article helpful?
2 out of 12 found this helpful
Have more questions? Submit a request



Article is closed for comments.