How do I change the date and time on my Glucocard Vital/ReliOn Prime Meter?

The time is now!

Or is it? Having the wrong time, or date, on your Glucocard Vital/ReliOn Prime meter can cause issues when trying to sync with Glooko. By following a few easy steps listed below you can make sure your data is there when you expect it to be.
 

In order to change the date and time on your Glucocard Vital/ReliOn Prime meter, simply follow the below instructions.​

Step 1: Turn on the meter

Press the On/Off button to turn the meter on. The full screen appears briefly. The meter then displays the time, date, unit of measurement, and the insert test strip symbol.

Step 2: Enter set-up mode

Press and hold down the On/Off button for more than 2 seconds to enter the set-up mode.

Step 3: Set the time format

The time can be displayed in either 24-hour format or 12-hour format with AM and PM.

The meter displays the current time format. To change format, press either the Back or Forward button. Press the On/Off button to select the time format. The date format then appears on the display.

Step 4: Set the date format

The date format can either be displayed as month/day (01/31) or day/month (31/01). The meter displays the current format. To change format, press either the Back or Forward button. Press the On/Off button to select the date format. The hour setting then flashes on the display.

Step 5: Set the hour

Press and release the Back or Forward button to change the hour. Hold the Back or Forward button down to scroll through quickly. When the correct hour is displayed, press the On/Off button. The minute setting then flashes on the display.

 

Step 6: Set the minute

Press and release the Back or Forward button until the correct minute appears. Hold the Back or Forward button down to scroll through quickly. When the correct minute is displayed, press the On/Off button. The month setting then flashes on the display. 

Step 7: Set the month (If day/month format is selected then Step 7 will set day)

Press and release the Back or Forward button until the correct month appears. Hold the Back or Forward button down to scroll through quickly. When the correct month is displayed, press the On/Off button. The day setting then flashes on the display.

Step 8: Set the day

(If day/month format is selected then Step 8 will set month) Press and release the Back or Forward button until the correct day appears. Hold the Back or Forward button down to scroll through quickly. When the correct day is

displayed, press the On/Off button. The year setting then flashes on the display.

Step 9: Set the year

Press and release the Back or Forward button until the correct year appears. Hold the Back or Forward button down to scroll through quickly. When the correct year is displayed, press the On/Off button for two seconds to exit set up mode.

 

Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.