How do I change the date and time on my OneTouch UltraMini meter?

The time is now!

Or is it? Having the wrong time, or date, on your OneTouch Ultra Mini meter can cause issues when trying to sync with Glooko. By following a few easy steps you can make sure your data is there when you expect it to be.

In order to change the date and time on your OneTouch Ultra Mini, simply follow the below instructions. 

  1. Put the UltraMini into Settings Mode:

    Press and hold the power button on the meter (the ▼ button on the front of the meter) for at least 10 seconds. If you have held the button long enough, you should see the time and date appear on the top right hand of the screen.


    (Note: If you see a BG reading appear on the screen, this means that you have not held the button for long enough. Press and hold the ▼ button to turn off your meter and repeat step 1.)

  2. Set the Hour

    You will see the hour flash on the display. Press and release the ▲ or ▼ buttons to go forward or backward one hour. To move faster, hold the ▲ or ▼ buttons down.


    When the correct hour appears on the display, wait five seconds. Your entry will be saved and you will move to the next setting. The minutes will now start flashing.
     
  3. Set the Minutes 

    Press and release the ▲ or ▼ buttons to change the minutes. When you have the correct minutes on the display, wait five seconds to move to the next setting.

    AM or PM will now start flashing.

  4. Set AM or PM

    “AM or “PM” will be displayed next to the minutes. Press the ▲ or ▼ buttons to set AM or PM, then wait five seconds to move to the next setting.

  5. Set the Year

    Press the ▲ or ▼ buttons to change the year. When you have the correct year on the display, wait five seconds to move to the next setting.

  6. Set the Month

    Press the ▲ or ▼ buttons to change the month. When you have the correct month on the display, wait five seconds to move to the next setting.

    The day will now start flashing. 

  7. Set the Day

    Press the ▲ or ▼ buttons to change the day. When you have the correct day on the display, wait five seconds to move to the next screen.

    Your time and date settings will be displayed for five seconds. After the five seconds, the settings will be saved and the meter will then turn off.

     If you want to readjust your settings, press the ▲ or ▼ buttons while the time and date are still on the display. You will be returned to the first setup screen where you can begin with the hour.

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.