How do I change the date and time on my OneTouch Ultra2 or UltraLink meter?

The time is now...

Or is it? Having the wrong time or date on your OneTouch Ultra2 or UltraLink meter can cause issues when trying to sync with Glooko. By following a few easy steps, you can make sure your data is there when you expect it to be

In order to change the date and time on your OneTouch Ultra2 or UltraLink meter, simply follow the below illustrations.

1. Turn the Meter On
   With the meter turned off, press and hold the "OK" button for two seconds. 
2. Enter the Set Up Screen
   From the MAIN MENU screen, press the ▲ or ▼ buttons to select SET UP.
   To confirm your selection, press OK. 
   Then, press the ▲ or ▼ buttons to select METER SETTINGS.
   To confirm your selection, press OK.
   The display now shows the LANGUAGE screen.
    
3. Choose a language

   Now press the ▲ or ▼ buttons to highlight the language of your choice. To confirm your selection, press OK.

   The display now shows the DATE FORMAT screen. 
4. Set the Date Format
   Press the ▲ or ▼ buttons on the front of the meter to highlight the desired date format – choose month first (MM-DD-YYYY) or day first (DD-MM-YYYY). To confirm your selection, press OK.
    
5. Set the Date

   In the DATE SET UP screen, press ▲ or ▼ to change the first value. To confirm your selection, press OK.

   Press ▲ or ▼ to change the second value. To confirm your selection, press OK.
   Press ▲ or ▼ to change the year. To confirm your selection, press OK.

   The display now shows the TIME FORMAT screen.

6. Set the Time Format

   Press ▲ or ▼ to select the time format you prefer—AM/PM or 24 HR. To confirm your selection, press OK.
   The display now shows the TIME SET UP screen.

7. Set the Time

   Press ▲ or ▼ to set the hour. To confirm your selection, press OK

   Press ▲ or ▼ to set the minutes. To confirm your selection, press OK.

   If you have selected the AM/PM time format, AM or PM will be displayed next to the minutes.

   Press ▲ or ▼ to set AM or PM. To confirm your selection, press OK.
   The display now shows the SETTINGS screen.

8. Confirm your Settings

   The choice YES will be highlighted at the bottom of the screen. If your settings are correct, press to confirm and save the settings and return to the MAIN MENU.

   If you want to cancel your settings and start the settings process over again, press ▲ or ▼ to highlight NO and press OK. You will be returned to the LANGUAGE screen. Note that none of the settings you entered will be saved.

   If you are done, select METER OFF to turn off the meter.