How do I connect my Ascensia Contour® NEXT ONE?

Let's get started!

You can upload data from your Ascensia Contour® NEXT ONE meter to the Glooko Mobile app for iOS and Android by following the instructions below.

What you will need:

  • Glooko app installed on a compatible Android or iOS smart device
  • Your Ascensia Contour® NEXT ONE meter

Time to Sync!

In the Glooko Mobile app, navigate to the Sync Menu:

  1. From the Home screen, tap Sync.
  2. Tap Ascensia Contour® NEXT ONE (if it is not already listed as an option, add it by tapping Add Device).
  3. Start with your meter OFF and located within a couple of inches of your smart device.
  4. Press and hold the circular button on your meter until the meter begins flashing blue.
  5. Keep your meter ON and tap Next in the Glooko Mobile App.
  6. Your meter will now automatically sync data to the Glooko Mobile App when your meter is ON, and it is near your smart device.
  7. Tap Done.

 

1_devices.PNG  2_press_for_blue_light.png  4_meter_paired_successfully.png

 

Helpful Hints:

Pairing

  • Verify the meter is not paired from the Bluetooth Device list on your smart device. If it is already paired with your smart device's Bluetooth list, remove the device from your Bluetooth settings and try again.
  • Make sure meter is within 20 feet of iOS or Android device.

 

Syncing

  • Make sure that the correct default device is selected on the meter in the pairing settings.
  • Make sure meter is within 20 feet of iOS or Android device.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.